It is an efficient catalyst for removing mercaptan in light oil. Gasoline refined from sour crude oil contains higher mercaptan sulfur content.

mercaptan wrapped in fuel is malodorous and corrosive, which reduces the lead content of gas. except, mercaptan is also an oxidation initiator, which can promote the oxidation and condensation of risky components in fuel to gel, resulting in terrible garage balance of gasoline. cobalt phthalocyanine sulfonate is an powerful catalyst for disposing of mercaptan sulfur from heavy oil, and it has the identical effect. whilst in use, dissolve the catalyst in 10% alkali solution, heat it slightly for a time frame, and stir to dissolve it before use.

citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.

Addition with hydrogen chloride generates 2-chloropropionic acid. Used in the preparation of acrylic resins and other organic synthesis. It is made by oxidation of acrolein or hydrolysis of acrylonitrile, or made by carbon monoxide, acetylene and water under the action of nickel catalyst.

its density is 1.542g/cm3, its melting point is 153-159℃, and water and carbon dioxide are differentiated and launched above a hundred seventy five℃. citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.

The lactic acid transport speed is affected by a series of factors, and includes a monocarboxy-dient, lactate dehydrogenase concentration and isomer form, and the oxidative capacity arranged. Generally, the concentration of lactic acid in the blood is from 1-2 mmol / L during non-exercise, and can rise to 20 mmol / L during intense exercise.

Ricia oil contains a lot of ricic acid (more than 80%), so many unique properties: 1. It is easy to dissolve in ethanol, which is difficult to dissolve in petroleum ether. This feature is more likely to distinguish between castor oil from other grease. 2. The viscosity is much higher than that of the general oil, and 25 is 680 cps, the viscosity index 84, the friction coefficient is very low (0.1). The fluidity of castor oil is good, and the refined castor oil can still flow in -22. 3.

The melting point is 13.5°C, the boiling point is 140.9°C, and the density (20/4°C) is 1.0611g/cm3. The chemical nature is lively. It is easy to polymerize in air and can be reduced to propionic acid by hydrogenation. Addition with hydrogen chloride generates 2-chloropropionic acid. Used in the preparation of acrylic resins and other organic synthesis. It is made by oxidation of acrolein or hydrolysis of acrylonitrile, or made by carbon monoxide, acetylene and water under the action of nickel catalyst.

Potassium hydroxide is a common inorganic base with a chemical formula of KOH and a molecular weight of 56.1. It is a white powder or flake solid at room temperature.

Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal. It is compatible with cellulose acetate and phrochloride cellulose. The cold resistance and light resistance of the product are similar to the tributyl citrate, but water resistance is better. Non-toxic, LD50 = 4000 mg / kg.

It is a solvent for a variety of coatings and a raw material for preparing dibutyl phthalate, a plasticizer. It is also used in the manufacture of butyl acrylate, butyl acetate, ethylene glycol butyl ether,

It is also used in the manufacture of butyl acrylate, butyl acetate, ethylene glycol butyl ether, as an extractant for organic synthesis intermediates and biochemical drugs, and in the manufacture of surfactants.

Amino -alumanate pesticide is a synthetic pesticide developed after organic phosphate. Its general formula is RO (C) NRR. Amino -aminate pesticides generally have no special odor, stable in acidic environments, alkali decomposition, and most varieties are lower toxicate than organic phosphate

Citric acid (CA), also known as citric acid, with the molecular formula C₆H₈O₇, is an important organic acid. It is colorless crystals, odorless, has a strong acid taste, is easily soluble in water, and is a natural preservative and food additive .

Acrylic acid has a chemical formula of C3H4O2 and a molecular weight of 72.06.

Generally speaking, when the energy of the arrangement cannot be satisfied with oxygen breathing, it is arranged that the oxygen that cannot be obtained may not satisfy the quick treatment of oxygen, the concentration of lactic acid will rise. In this case, the acetone dehydrogenase cannot be converted to acetyl coenzyme a, pyruvate start-up. In this case, if the lactate dehydrogenase does not reduce the reduction of pyruvic acid as lactic acid, the composition of triphosphate is inhibited.

it can also be used as high octane gasoline components, is an important raw material for organic chemicals. It can also be used to remove the bitumen of the body. The hospital pathology is primarily used for tissue, slice of pilot and dewaxing.

Ammonia, also known as Amonia water, can be written as NH3(aq), which is an aqueous solution of ammonia, colorless, transparent and has a pungent odor.

Appearance and properties: white or almost white fibrous or granular powder Density: 1.39 g/cm3 Solubility: almost insoluble in absolute ethanol, ether, acetone; swelling in cold water into a clear or slightly dirty colloidal solution Stability: The solid is flammable and incompatible with strong oxidants.

Car urea is an essential product for heavy-duty diesel vehicles to meet the National IV emission standards. Vehicle urea refers to an aqueous urea solution with a urea concentration of 32.5% and ultrapure water as the solvent. The raw materials are urea crystals and ultrapure water. For diesel vehicles such as heavy trucks and passenger cars to meet the National IV emission standards, a suitable SCR system must be selected for exhaust gas treatment, and this system must use urea solution to treat nitrogen oxides in the exhaust gas.

For diesel vehicles such as heavy trucks and passenger cars to meet the National IV emission standards, a suitable SCR system must be selected for exhaust gas treatment, and this system must use urea solution to treat nitrogen oxides in the exhaust gas. Therefore, urea solution for vehicles has become an essential product for heavy-duty trucks and passenger cars to meet the National IV emission standards.

This product is the standard configuration of SCR technology, the solution concentration is 32.5% 0.7%, which can effectively reduce exhaust pollution and ensure engine efficiency ;8-stage pretreatment + RO reverse osmosis technology + EDI electrodeionization water purification technology + high-precision filtration and purification to ensure the purity of the solution from the source, Delay SCR scaling, protect the urea pump and pipeline; select ultra-high-purity urea particles, made through multiple purification processes, long-term maintenance of the system and catalyst activity, and prol